Cable - Huawei SmartAX MA5600T Hardware Description

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
About This Chapter
This topic covers the appearance, pin assignments, applications, and technical specifications
of the cables used by the device.
5.1 Power Cable and Ground Cable
Power cable supplies power and ensures that the load works in the normal state, and ground
cable is used to protect devices from lightning strike and interference.
5.2 Subscriber Cable
This topic provides the appearance and parameters of the subscriber cable, and describes the
application and pin assignments of the cable.
5.3 E1 Trunk Cable
This topic covers the applications, appearances, pin assignments, and technical specifications
of E1 trunk cables.
5.4 Clock Cable
This topic covers the applications, appearances, and technical specifications of Clock cables.
5.5 Network Cable
A network cable is used for equipment cascading, communication between the device and the
network, and local maintenance and remote access of the device.
5.6 Optical Fiber
An optical fiber connects an optical port to an upstream device or optical network terminal.
5.7 Environment Monitoring Cable
Environment monitoring cable is the shielded straight-through network cable, and it used to
transmit the monitored signals collected by the ESC board to the control board.
5.8 Local Maintenance Serial Cable
A local maintenance serial cable is used for debugging devices or maintaining devices at the
local end.
5.9 Local Maintenance and Environment Monitoring Combo Cable
A local maintenance and environment monitoring combo cable is connected to a local
maintenance terminal or an environment monitoring device for debugging and maintaining
the main device or reporting the monitoring information to the control board.
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

5 Cable

5
Cable
862