Huawei FusionModule1000A40 Maintenance Manual page 119

FusionModule1000A40 Prefabricated All-in-One
Data Center
Maintenance Guide
Figure 5-54 Position of the cables to the pressure announciator
Step 4 Remove the high-pressure hose and adapter of the fire cylinder using an
adjustable wrench, as shown by (1) and (2) in
Figure 5-55 Removing the high-pressure hose and adapter
Step 5 Loosen the straps on the fire cylinder.
Step 6 Move the fire cylinder out of the installation position.
Step 7 Move the new fire cylinder to the installation position using a pallet truck, and
tighten the fire cylinder steel straps.
Issue 04 (2021-02-10)
NO TE
● Do not impact or strike the fire cylinder during transportation or installation.
● Assign sufficient people for transportation and installation if no auxiliary tool is
available.
● Keep the pressure gauge panel outward so that people can view the reading.
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
Figure 5-55.
112