ABB ACS560 Quick Installation And Start-Up Manual page 93

Index Name
76.43 Stop point 3
76.55 Start delay
76.56 Stop delay
76.57 PFC speed hold on
76.58 PFC speed hold off
76.59 PFC contactor delay
76.60 PFC ramp acceleration time
76.61 PFC ramp deceleration time
76.70 PFC autochange
Not selected[0]
Selected[1]
DI1[2]
76.71 PFC autochange interval
76.72 Maximum wear imbalance
76.73 Autochange level
76.74 Autochange auxiliary PFC
76.81 PFC interlock 1
Interlocked. PFC motor
is not in use[0]
Available. PFC motor is
available[1]
DI1[2]
76.82 PFC interlock 2
76.83 PFC interlock 3
76.84 PFC interlock 4
76.95 Regulator bypass control
77 PFC maintenance and monitoring
77.10 PFC runtime change
Done[0]
Set any PFC run time[1]
Reset PFC1 run time[2]
77.11 Pump/fan 1 running time
77.12 Pump/fan 2 running time
77.13 Pump/fan 3 running time
Range/List
0...32767
0.00...12600.00
0.00...12600.00
0.00...1000.00
0.00...1000.00
0.20...600.00
0.00...1800.00
0.00...1800.00
0...13
DI2[3] DI5[6]
DI3[4] DI6[7]
DI4[5] Timed function 1[8]
0.00...42949672.95
0.00...1000000.00
0.0...300.0
All motors[0], Aux motors
only[1]
0...10
DI2[3]
DI3[4]
DI4[5]
See parameter 76.25 PFC
interlock 1
See parameter 76.25 PFC
interlock 1
See parameter 76.25 PFC
interlock 1
Disable[0], Enable[1], Other...
0...5
0.00...42949672.95
0.00...42949672.95
0.00...42949672.95
Parameter listing 93
Unit Default
Hz 25
s 10.00
s 10.00
s 0.00
s 0.00
s 0.50
s 1.00
s 1.00
- Not selected[0]
Timed function 2[9]
Timed function
3[10]
Fixed interval[11]
h 1.00
h 10.00
% 100.0
- Aux motors only[1]
- Available. PFC motor
is available [1]
DI5[6] Timed function 2[9]
DI6[7] Timed function 3[10]
Timed function 1[8] Other...
- Available. PFC motor
is available [1]
- Available. PFC motor
is available [1]
- Available. PFC motor
is available [1]
- Disable[0]
- Done[0]
Reset PFC2 run time[3]
Reset PFC3 run time[4]
Reset PFC4 run time[5]
h 0.00
h 0.00
h 0.00
EN
All stop[12]
HI
Even wear[13]
Other...