Energy Efficiency - ABB ACS560 Quick Installation And Start-Up Manual

42 EN - Quick installation and start-up guide
Diagnostics
Displays the active faults and warnings and how to fix and reset. For information about fault
and warning codes, see section
EN
1 Active Fault - Displays active faults.
HI
2 Fault History - Lists the fault history.
3 Active Warnings - Displays active warnings.
4 I/O status - I/O settings.

Energy Efficiency

Optimizes the motor flux so that total energy consumption and motor noise level are reduced
when drive operates below the nominal load.
1 Saved energy in kWh - Energy saved in kWh compared to direct-on-line motor connection.
2 Saved money - Monetary savings compared to direct-on-line motor connection.
3 Saved energy in MWh - Energy saved in MWh compared to direct-on-line motor connection.
4 Saved money x 1000 - Monetary savings in thousands compared to direct-on-line motor connection.
5 Cost per kWh - Energy cost (in INR) per kWh.
Diagnostics (page 111).
1
3
1
3
5
2
4
2
4