Memory Deletion - Panasonic YC-300BP2YAF Operating Instructions Manual

6.3.4 Memory deletion

While this product is capable of storing up to 50 different
welding conditions (P01 to P50), if you want to delete any
• Hold down the JOG dial, and while holding it down,
1
turn on the "POWRE" switch.
• Turn the JOG dial until the screen on the right
2
appears.
3 • Press the JOG dial.
• Press the JOG dial.
Note
4
The screen on the right
appears on the digital
ammeter.
• Turn the JOG dial to select a program number you
want to delete.
5
* Stored program numbers appear in series.
6 • Press the JOG dial.
7 • Turn the JOG dial and have "YES" displayed.
• Press the JOG dial.
8
* To continue to delete the memories of other pro-
gram numbers: Go to the operation (4).
9 On completion of the desired deletion of program number memories, turn the power switch off.
OMCTT5639E09
Operation
welding conditions that you programmed, follow the follow-
ing steps.
Set-value display
(When selecting "P01")
Operation
LCD display
Rescue Menu
YC-300BP Series
Then indication changes to
1 Set Defaults?
No
2 Delete Page
P - -
2 Delete Page
P - -
Are you sure?
* * * *
2 Delete Page
P - -
35