After The Test Completes - Panasonic YC-300BP2YAF Operating Instructions Manual

7.3.2 After the test completes

If power is ON without removing
WARNING the jumper bar for test, devices
may be damaged or burnt out.
Unless cables removed for test
CAUTION are returned, the unit may not
operate or may malfunction.
Remove all the short-circuited cables for the test and return
the disconnected cables as they were according to the
following procedure.
OMCTT5639E09
Maintenance and inspection
• Reconnect the ground cables and connectors on the PC
board as they were.
• Return the dust cover, top panel, right panel, and left
panel as they were.
• Connect the input power cable to the input terminal and
return the terminal cover.
• Connect the input power cable to the power box switch.
45