Selecting Manual Operation For Racking - Siemens NXAIR M Operating Instructions Manual

Air-insulated switchgear
Table of Contents

Advertisement

Push the handle downwards as far as it will go.
Fit a padlock to the control door and close it.
Fig. 356: Pulling out the withdrawable
The control door is closed.

23.4 Selecting manual operation for racking

Fig. 358: Access mode indicator for racking: starting point "M" or "T"
139-2021.9 / 07
Panels with motor operating mechanism control
circuit-breaker, type 3AE1:
pulling the handle, fitting the
padlock
NOTICE
Conflicting operation
The requirement of setting the panel to either local or remote control prevents
operating the panel locally and centrally at the same time.
For any local operations ─ manual or electrical ─ set the panel to local
control, for example by switching the local-remote switch to LOCAL
position.
Fig. 357: Pulling out the withdrawable
NXAIR M
circuit-breaker, type 3AE5:
pulling the handle, fitting the
padlock
or
211

Advertisement

Table of Contents
loading

This manual is also suitable for:

139-2021.9

Table of Contents