Racking the withdrawable circuit-breaker is set to manual operation.
23.5 Selecting electrical operation for racking
Fig. 362: Access mode indicator for racking: starting point "H"
139-2021.9 / 07
Panels with motor operating mechanism control
HINT
Final procedure steps
Next, insert the racking crank for moving the withdrawable circuit-breaker.
NOTICE
Conflicting operation
The requirement of setting the panel to either local or remote control prevents
operating the panel locally and centrally at the same time.
For any local operations ─ manual or electrical ─ set the panel to local
control, for example by switching the local-remote switch to LOCAL
position.
HINT
Electrical racking is only possible when both the high-voltage door and the control
door are closed.
After releasing electrical access to the withdrawable circuit-breaker, close
the control door and padlock it.
NXAIR M
213