Removing Or Plugging On The Low-Voltage Connector; Taking The Withdrawable Disconnector Link Out Of A Panel Or Inserting In A Panel; Earthing Or De-Earthing The Feeder - Siemens NXAIR M Operating Instructions Manual

Operating the disconnecting panel

11.6 Removing or plugging on the low-voltage connector

The procedure for removing and/or plugging on the low-voltage connector in the disconnecting panel is
identical with the procedure for removing and/or plugging on the low-voltage connector in the circuit-breaker
panel.
For removing and/or plugging on the low-voltage connector in the disconnecting panel, see
chapter 10.17 and/or 10.18.

11.7 Taking the withdrawable disconnector link out of a panel or inserting in a panel

The procedure for inserting and/or removing the withdrawable disconnector link in the disconnecting panel is
identical with the procedure for inserting and/or removing the withdrawable circuit-breaker in the circuit-
breaker panel.
inserting and/or removing the withdrawable disconnector link
For
panel, see chapter 10.20 and/or 10.19.

11.8 Earthing or de-earthing the feeder

The procedure for earthing and/or de-earthing the feeder in the disconnecting panel is identical with the
procedure for earthing and/or de-earthing the feeder in the circuit-breaker panel.
For earthing and/or de-earthing the feeder in the disconnecting panel, see chapter 10.15
and/or 10.16.
76 NXAIR M
in the disconnecting
139-2021.9 / 07