Phasor Measurement Unit (Pmu); Pmu Settings - Siemens SIMEAS R-PMU Manual

12.14 Phasor Measurement Unit (PMU)

12.14.1 PMU Settings

First of all, select the dialog Phasor Measurement Unit to set the parameters for the PMU.
Figure 12-37 Phasor Measurement Unit dialog
Activate the PMU by checking the Enable PMU checkbox.
The currently set nominal frequency is displayed.
Assign a name (PMU Name) and a unique PMU ID to the SIMEAS R-PMU.
Note
The assigned PMU ID is valid for the central processing unit of the SIMEAS R-PMU. Since every
DAU is regarded as an individual Phasor Measurement Unit that is subordinate to the central
processing unit, the DAU modules are automatically assigned the sequence numbers of the
central processing unit as a PMU ID.
Depending on the design of the SIMEAS R-PMU type (ZE 8/16 or ZE 32/64), a range between
two and five PMU IDs is required. Please bear this in mind when assigning the PMU IDs.
Depending on the nominal frequency, you can select the sampling rate from the drop-down
menu Reporting Rate.
In the Data format field, you can define either the 16 bit integer or the 32 bit floating point
format.
In the Data Type AC DAUs box, you can choose between the transmission of the All
Phasors or the Positive sequence only.
Activate the PMU functions for every slot that is equipped with a DAU by checking the
appropriate checkbox under Slot configuration.
Digital Fault Recorder, SIMEAS R-PMU, Manual
E50417-H1076-C360-A5, Release 10.2012
12.14 Phasor Measurement Unit (PMU)
12
173