Removing The Front Cover - Toro TX 1300 Operator's Manual

Removing the Rear Cover
1. Remove the 2 bolts securing the top of the rear
cover.
Figure 61
2. Lift the cover out of the slots in radiator bracket.
Figure 62
Removing the Bottom Plate
1. Remove the 2 bolts securing the bottom plate.
2. Remove the bottom plate.

Removing the Front Cover

g359278
1. Raise the loader arms and secure them with the
cylinder locks.
2. Loosen the 2 bolts securing the front cover to
the machine.
1. Front cover
3. Slide the cover off the machine.
4. When installing the cover, torque the bolts to 41
N∙m (30 ft-lb).
g359279
44
Figure 63
Figure 64
2. Bolt (2)
g359291
g359302