Controls System Maintenance; Adjusting The Controls; Hydraulic System Maintenance; Hydraulic System Safety - Toro TX 1300 Operator's Manual

Controls System
Maintenance

Adjusting the Controls

The factory adjusts the controls before shipping the
machine. However, after many hours of use, you
may need to adjust the traction control alignment,
the N position of the traction control, and the
EUTRAL
tracking of the traction control in the full forward
position.
Contact your Authorized Service Dealer to adjust the
controls of your machine.
Hydraulic System
Maintenance

Hydraulic System Safety

•
Seek immediate medical attention if fluid is injected
into skin. Injected fluid must be surgically removed
within a few hours by a doctor.
•
Ensure that all hydraulic-fluid hoses and lines are
in good condition and all hydraulic connections
and fittings are tight before applying pressure to
the hydraulic system.
•
Keep your body and hands away from pinhole
leaks or nozzles that eject high-pressure hydraulic
fluid.
•
Use cardboard or paper to find hydraulic leaks.
•
Safely relieve all pressure in the hydraulic system
before performing any work on the hydraulic
system.
Relieving Hydraulic
Pressure
To relieve hydraulic pressure while the engine is on,
disengage the auxiliary hydraulics and fully lower and
retract the loader arms.
To relieve the pressure while the engine is off, cycle
the joystick between the forward positions to lower
the loader arms.
61
Figure 98
g362371