Controls - Toro TX 1300 Operator's Manual

Controls

Control Panel
Become familiar with all the controls before you start
the engine and operate the traction unit.
1. Plug for optional kit
2. Parking brake switch
3. Reference bar
4. InfoCenter Display
5. Power socket
6. Throttle switch
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O , R
FF
Parking-Brake Switch
Press the parking-brake switch to engage and
disengage the parking brake. The parking brake also
engages automatically when you shut off the machine.
Throttle Switch
Hold the switch forward for 2 or more seconds to set
the throttle at HIGH IDLE; hold the switch rearward for
2 or more seconds to set the throttle at LOW IDLE;
or momentarily press the switch in either direction to
increase or decrease the engine speed in smaller
increments.
Figure 4
7. Key switch
8. Horn
9. Loader-valve lock
10. Loader arm/attachment-tilt
lever
11. Joystick controls
12. Traction control
, and S .
UN TART
Reference Bar
When driving the traction unit, use the reference bar
as a handle and a leverage point for controlling the
traction control and the joystick lever. To ensure
smooth, controlled operation, do not take your hands
off the reference bars while operating the machine.
Traction Control
1. Reference bar
2. Traction control
•
To move forward, move the traction control
g318044
forward.
•
To move rearward, move the traction control
rearward.
Important:
for obstructions and keep your hands on the
reference bar.
12
Figure 5
Figure 6
When reversing, look behind you
Figure 7
g029289
g264830
g264831