Single Device Connection - Beko BEKOMAT 16i CO Translation Of Original Installation And Operation Manual

BEKOMAT ® 16i CO

7.2.1 Single device connection

Illustration
2
2
38 | 76
Connection work - single device
1
10
50 mm (1.97 in)
6 mm
(0.23 in)
Original installation and operation manual
Description / explanation
1. Loosen the 4 screws [1].
2. Lift the top cover [2].
3. Raise the top cover [1] slightly and pull the terminal
clamp [10] off.
4. Remove the plug [7] and screw the cable gland
components [4, 5, 6] off the right cable gland [B].
5. Prepare the connection cable [X8].
6. Fit the cable gland components [4, 5, 6] over the
connection cable [X8].
7. Insert the connection cable [X8] into the
right cable gland [B].