Beko BEKOMAT 16i CO Translation Of Original Installation And Operation Manual page 46

BEKOMAT ® 16i CO
Illustration
For further information about fault indications during operation, see "15. Troubleshooting and fault repair / FAQ" on
Page 72.
46 | 76
n = ∞
Original installation and operation manual
Description / explanation
Discharge procedure (TEST button pressed briefly)
• The red ALARM LED is off.
• The green VALVE LED is on during the discharge
procedure.
• The green POWER LED is on.
Pre-alarm (TEST button pressed >1 minute and
<5 minutes)
• The red ALARM LED flashes.
• The green VALVE LED is on.
• The green POWER LED is on.
Alarm (TEST button pressed >5 minutes)
• The red ALARM LED is on.
• The green VALVE LED is off.
• The green POWER LED is on.
Alarm mode (condensate discharge is impaired)
• The red ALARM LED flashes.
• The green POWER LED is on.
• The green VALVE LED is on when the solenoid valve is
cycling.
0 The solenoid valve is cycling every 4 minutes.
After the malfunction has been eliminated, the
BEKOMAT automatically switches to normal operation.
®