Table of Contents
Advertisement
Original installation and operation manual
8.2 Commissioning work
Illustration
X2
X3
X5
X4
X5
X2
X3
X4
Description / explanation
1. Connect the voltage supply.
0 The BEKOMAT
carries out the power-on self-test.
®
2. Slowly pressurise the system (e.g. by slowly opening
the recommended shut-off valve [X4] in the
condensate inlet line [X5]).
0 Slowly open the shut-off valve [X3] in the venting
line.
3. Carry out a functional test (see "10.3.2 Functional test"
on Page 54).
BEKOMAT
16i CO
®
43 | 76
Advertisement
Table of Contents
