Table of Contents
Advertisement
Original installation and operation manual
10.3.3 Visual inspection
During the visual inspection of the BEKOMAT
damaged components immediately.
10.3.4 Leakage test
The leakage test is a non-destructive test method and is used to prove leak tightness in vacuum and overpressure
systems. The leakage test can be carried out in different ways. BEKO TECHNOLOGIES provides no recommendations
for selecting a testing process. The operating company of the pressurised system is responsible for the selection and
specification of the test method to be used, which should be executed in corresponding to with valid standards and
regulations (e.g. DIN EN 1779).
, inspect all components for mechanical damage and corrosion. Replace
®
BEKOMAT
16i CO
®
55 | 76
Advertisement
Table of Contents
