Connecting Multiple Modbus Devices (Series Connection) - Beko BEKOMAT 16i CO Translation Of Original Installation And Operation Manual

BEKOMAT ® 16i CO

7.2.2 Connecting multiple Modbus devices (series connection)

Illustration
2
2
10
40 | 76
Connection work - series connection
1
50 mm (1.97 in)
6 mm
(0.23 in)
Original installation and operation manual
Description / explanation
1. Loosen the 4 screws [1].
2. Lift the top cover [2].
3. Raise the top cover [2] slightly and pull the terminal
clamp [10] off.
4. Remove the plugs [7] and screw the
cable gland components [4, 5, 6] off the
right cable gland [B] and left cable gland [C].
5. Remove the dust protection pane [3].
6. Prepare connection cable [X8] and connection
cable [X9].