Installation and operation manual
3.5 Modbus function
The FRC features an integrated Modbus RTU interface that can be used to read the operating parameters and
device information.
The FRC is operated using the client-server system with the Modbus-RTU operating mode.
Data is transmitted via an RS485 interface in binary format.
INFORMATION Modbus configuration
i
3.5.1 Default interface parameters
Value
Baud rate
Data bits
Stop bits
Parity
Client address
For further information on the Modbus function, refer to the "Modbus
Configuration Description" document (see section "1.3 Other applicable
documents" on page 6).
Parameter
19200
8
1
even
247
QWIK-PURE
®
25 | 124