QWIK-PURE
®
12.2 Decommissioning work
Illustration
104 | 124
Description / explanation
1. Cut off the condensate feed to the QWIK‑PURE
and divert the incoming condensate into a
separate container.
3 sec
2. Switch off the FRC. Press and hold down the ON/
OFF button for 3 seconds.
0 The FRC switches to standby mode.
0 All LEDs go out and the status LED STATUS
3. Close the compressed air supply and lock and tag
it out so that it cannot be opened again.
Installation and operation manual
BAR flashes white at regular intervals.
®