Reset Error Message - Beko QWIK-PURE 15 Installation And Operation Manual

QWIK-PURE ®

9.2.10 Reset error message

Illustration
80 | 124
Description / explanation
1. Read the error message via the WLAN function (see
section "3.6 WLAN function" on page 26) or the
Modbus function (see section "3.5 Modbus function"
on page 25).
2. Determine the cause of the error and rectify the error
(see section "15. Troubleshooting" on page 115).
If you cannot fix the cause of the error, contact
BEKO TECHNOLOGIES Service (see section "1.1
Contact" on page 5).
3 sec
3. Press and hold down the Service button and the Enter
button simultaneously for 3 seconds.
0 The error message will be reset.
0 The display will switch to the START MENU
screen.
Installation and operation manual