Handling Hazardous Substances; Use Of Spare Parts, Accessories Or Materials - Beko QWIK-PURE 15 Installation And Operation Manual

QWIK-PURE ®
• Pay attention to order and cleanliness during maintenance and repair work. Prevent contamination from
entering the opened product or accessories. Store disassembled components and accessories directly in a
safe place.
• After completing maintenance and repair work, remove all tools and cleaning agents used, as well as all
parts that are no longer needed, from the work area.
• Only dispose of product and accessories when cleaned and freed of any residue.
• Dispose of all components, parts, operating and auxiliary materials as well as cleaning agents
professionally and in accordance with all locally applicable regulations and standards.
• Dispose of electrical and electronic components using a specialist disposal company or return them to
manufacturer.

2.5.8 Handling hazardous substances

Contact with condensate containing substances which endanger health and the environment can pose
a health hazard, causing irritation and/or damage to the eyes, skin and mucous membranes. In addition,
polluted condensate must be prevented from entering the sewerage system, waters or the ground.
For the safe handling of polluted condensate, observe the following:
• Use suitable personal protective equipment when handling condensate.
• Pick up and dispose of any leaking or spilled condensate in accordance with applicable regional laws and
requirements.

2.5.9 Use of spare parts, accessories or materials

Use of incorrect spare parts, accessories, materials, auxiliary and operating materials, may result in death or
serious injury. Malfunction, device failure or material damage may occur.
• Only use undamaged original parts, auxiliary and operating materials which are specified by the
manufacturer to complete all work.
• Only use the materials approved for the respective application and suitable tools in proper working order.
• Only use cleaned pipes that are free of dirt and corrosion.
• Only use electric components and materials that comply with regionally applicable specifications and
regulations (standards, directives etc.) for electrical safety.
14 | 124
Installation and operation manual