Beko QWIK-PURE 15 Installation And Operation Manual page 110

QWIK-PURE ®
Illustration
110 | 124
Disassembly work
Description / explanation
12. Cut off the power supply and lock and tag it out.
13. Loosen the union nut of the power supply cable
on the FRC anticlockwise and remove it from the
connection.
14. Loosen the union nuts of the Modbus wiring on
the FRC anticlockwise and remove them from
the connection.
15. Disassemble the compressed air hose.
16. Remove the hose between the tapping point and
the pressure relief chamber.
17. Disassemble and clean the FRC (see section
"10.3.5 Cleaning" on page 98).
Installation and operation manual