Beko BEKOMAT 16i CO Translation Of Original Installation And Operation Manual page 52

BEKOMAT ® 16i CO
Illustration
X
X
X
X
X
X
X
33
40
52 | 76
Wear part replacement
X X
X
34
Original installation and operation manual
Description / explanation
7. Replace all the components in the set of wear
parts [X].
8. Grease the O-rings in the set of wear parts.
9. Set the housing upper part [40] in place again
and screw tight using the nuts [34] and spring
washers [33].
10. Tighten the nuts [34] with a torque of
20 Nm +/- 5 Nm (14.75 ft-lb +3.69 ft-lb).