Polaris RZR XP 1000 2014 Service Manual page 152

ENGINE / COOLING SYSTEM
a
17. Install dowel pins into oil pump mounting holes.
18. Install the three bolts
crankcase. Torque mounting bolts to specification.
TORQUE
Oil Pump Mounting Bolts:
7 ft-lbs (10 Nm)
19. Reinstall oil pump pick-up
screws to specification.
TORQUE
Oil Pump Pick-Up Retaining Screws:
7 ft-lb (10 Nm)
20. Clean the gasket sealing surfaces on oil sump cover
and crankcase to remove old gasket material and
any oil.
Gasket surfaces must be DRY and oil free. Use care
upon assembly to keep oil away.
3.74
f d
that retain oil pump
s
. Torque mounting
NOTE
21. Apply a thin, continuous film of Crankcase Sealant
(PN 2871557) to sump cover mating surface
shown. Do not allow sealant to dry before assembly.
to the
22. Install the oil sump cover
23. Install the thirteen M6
retain the oil sump cover
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
g
h
onto the crankcase.
j
and three M8 bolts that
k
to the crankcase.
© Copyright Polaris Industries Inc.
as