Shock Compression Adjustment (Walker Evans™) - Polaris RZR XP 1000 2014 Service Manual

MAINTENANCE
SHOCK COMPRESSION ADJUSTMENT
(WALKER EVANS™)
The compression damping adjustment is located on the
shock 'Piggyback' reservoir of each shock. Damping
adjustments can be made without using any tools.
When the adjuster knob is turned counter-clockwise
until it stops, the damping is in the fully open position
(softest).
Turn the adjuster knob
compression damping. Turn the adjuster knob counter-
clockwise to decrease compression damping.
The recommended factory setting for the front and rear
shocks are provided in the following compression
adjustment tables.
Walker Evans™ 2.0" Front Shock:
Compression Adjustment Table
SETTING COMPRESSION DAMPING
Full counter-clockwise position
Softest
Factory 6 clicks from softest position
Full clockwise position
Firmest
2.34
NOTE
clockwise to increase
NOTE
Walker Evans™ 2.5" Rear Shock:
Compression Adjustment Table
SETTING COMPRESSION DAMPING
Full counter-clockwise position
Softest
Factory 7 clicks from softest position
Full clockwise position
Firmest
The rear shock adjuster can be found on the remote
reservoir. Clockwise will increase damping and counter-
clockwise will decrease damping.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.