Engine Installation - Polaris RZR XP 1000 2014 Service Manual

Table of Contents

ENGINE / COOLING SYSTEM

ENGINE INSTALLATION

Use the following procedure to reinstall the engine

1. Attach engine with suitable lifting straps to an

overhead or portable engine hoist.

2. Remove the engine stand adapter plate and install

the starter motor back onto engine. Torque starter

motor bolts to specification.

3. Install transmission joint bracket onto engine and

torque fasteners to specification in sequence.

Starter Motor Bolts:

7 ft-lb (10 Nm)

Trans Joint Bracket Bolts:

44 ft-lb (60 Nm)

4. Use the overhead or portable engine hoist and

suitable engine straps to lower the engine into the

vehicle frame.

Have an assistant help guide the engine in and out of

the vehicle while using an engine hoist to prevent

personal injury or damage to vehicle components.

5. Align both the front and rear engine mounting

locations. Install and hand tighten the four front

engine mounting nuts

DO NOT torque fasteners at this time.

6. Align transmission joint mounting holes with the

transmission front mounting holes.

9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual

Table of Contents