Front Gearcase Disassembly / Inspection - Polaris RZR XP 1000 2014 Service Manual

FRONT GEARCASE DISASSEMBLY /
INSPECTION
1. Drain and properly dispose of gearcase fluid.
Remove any metal particles from the drain plug
magnet.
2. Remove the seven cover screws and remove the
cover plate assembly.
3. Remove the LH output hub assembly from the clutch
housing or outer cover plate assembly.
NOTE
Nylon spacer is non-serviceable and should not be
removed.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
4. Remove and inspect the armature plate. Refer to
AWD Diagnosis, page 7.35 for detailed inspection
process.
5. Remove the torsion spring retainer and torsion
spring from the top of the ring gear.
FINAL DRIVE
7
7.37