Specifications - Pioneer PRA-BD11 Service Manual

1

1. SPECIFICATIONS

A [PRA-BD11]
SDI input connectors:
Connector configuration ................ BNC (1)
Input impedance ............................. 75 Ω
Supported video standard .............. SMPTE 259 M-C compliant
Supported audio standard .............. SMPTE 272 M compliant
AES/EBU input connectors:
Connector configuration ................. BNC (1)
Input impedance ............................. 75 Ω
B
Supported audio standard .............. AES-3ID-1995 compliant (Linear PCM, 48 kHz, 16/18/20 bit, industrial format) ∗1,∗3, ∗4
General:
Power supply ................................. +5 V DC (supplied internally by PRV-LX1)
Weight ........................................... 0.3 kg
Dimensions .................................... 195.5 (W) x 101 (D) x 28.4 (H) mm (including projections)
Ambient operating temperature ..... +5 to +35 °C (PRV-LX1 it mounts)
Ambient operating humidity ........... 5 to 85 % RH (no condensation)
∗1 Quantization bits input to the PRV-LX1 are converted to 16 bits.
∗2 Audio channel 3/4 input is not supported.
SDI audio can only be selected during SDI video input (audio only cannot be selected).
∗3 Compressed audio cannot be input.
C
∗4 Digital audio input of the CP-1201 consumer format is not supported.
[PRA-BD12]
SDI output connectors:
Connector configuration ................. BNC (1)
Output impedance .......................... 75 Ω
Supported video standard .............. SMPTE 259 M-C compliant
Supported audio standard ............. SMPTE 272 M compliant
AES/EBU output connectors :
D
Connector configuration .................. BNC (1)
Output impedance ........................... 75 Ω
Supported audio standard ............... AES-3ID-1995 compliant
General:
Power supply .................................. +5 V DC (supplied internally by PRV-LX1)
Weight ............................................ 0.3 kg
Dimensions ...................................... 195.5 (W) x 101 (D) x 28.4 (H) mm (including projections)
Ambient operating temperature ...... +5 to +35 °C (PRV-LX1 it mounts)
Ambient operating humidity ............ 5 to 85% RH (no condensation)
E
∗1 Video/audio data is not output when playing back content containing signals preventing unauthorized copying to protect
copyright holders, etc.
The PRA-BD12 does not support through output of SDI and AES/EBU signals via the PRA-BD11 (SDI AES/EBU input
board).
∗2 Compressed audio cannot be output.
∗3 Output of the CP-1201 consumer format is not supported.
• Specifications and design are subject to possible modification without notice.
F
4
1
2
(270 Mb/S, 525i/625i 4:2:2 component input)
(Linear PCM, 48 kHz, 20-bit, channel 1/2) *1, *2, *3
∗1
(270 Mb/S, 525i/625i 4:2:2 component output)
(Linear PCM, 48 kHz, 20-bit, channel 1/2) ∗2, ∗3
∗1
(Linear PCM, 48 kHz industrial format) ∗2, ∗3
2
3
PRA-BD11
3
4
4