Panel Facilities - Pioneer PRA-BD11 Service Manual

1

8. PANEL FACILITIES

A [PRA-BD11] [PRA-BD11]
B
SDI input connector SDI input connector
Input connector for SDI signals. Input connector for SDI signals.
Connect to an SDI output connector on Connect to an SDI output connector on
an industrial VTR or other equipment. an industrial VTR or other equipment.
Note that embedded audio does not Note that embedded audio does not
support input of compressed audio. support input of compressed audio.
C
AES/EBU input connector AES/EBU input connector
Input connector for AES/EBU signals. Input connector for AES/EBU signals.
Connect to an AES/EBU output connector Connect to an AES/EBU output connector
on an industrial VTR or other equipment. on an industrial VTR or other equipment.
This interface does not support the CP- This interface does not support the CP-
1201 consumer format and compressed 1201 consumer format and compressed
audio input. audio input.
Input only AES/EBU signals synchronized Input only AES/EBU signals synchronized
with the selected video signal to the PRV- with the selected video signal to the PRV-
LX1. LX1.
D
DC IN connector DC IN connector
PRA-BD11 power connector. PRA-BD11 power connector.
Use the supplied 4-pin cable (M) to Use the supplied 4-pin cable (M) to
connect the PRA-BD11 to the designated connect the PRA-BD11 to the designated
connector on the PRV-LX1. connector on the PRV-LX1.
26-pin connector 26-pin connector
Connector that transfers signals between Connector that transfers signals between
the PRA-BD11 and PRV-LX1. the PRA-BD11 and PRV-LX1.
E
Use the supplied FFC (M) cable to Use the supplied FFC (M) cable to
connect the PRA-BD11 to the designated connect the PRA-BD11 to the designated
connector on the PRV-LX1. connector on the PRV-LX1.
30-pin connector 30-pin connector
Connector that transfers signals between Connector that transfers signals between
the PRA-BD11 and PRV-LX1. the PRA-BD11 and PRV-LX1.
Use the supplied FFC (L) cable to connect Use the supplied FFC (L) cable to connect
the PRA-BD11 to the designated the PRA-BD11 to the designated
F
connector on the PRV-LX1. connector on the PRV-LX1.
96
1
2
PRA-BD11
2
3
3
4
4