Pioneer PRA-BD11 Service Manual page 97

5
[PRA-BD12]
SDI output connector
Output connector for SDI signals.
Connect to an SDI input connector on an
industrial VTR or other equipment.
Note that embedded audio does not
support output of compressed audio.
AES/EBU output connector
Output connector for AES/EBU signals.
Connect to an AES/EBU input connector
on an industrial VTR or other equipment.
This interface does not support the CP-
1201 consumer format and compressed
audio output.
DC IN connector
PRA-BD12 power connector.
Use the supplied 4-pin cable (L) to
connect the PRA-BD12 to the designated
connector on the PRV-LX1.
30-pin connector
Connector that transfers signals between
the PRA-BD12 and PRV-LX1.
Use the supplied FFC (L) cable to connect
the PRA-BD12 to the designated
connector on the PRV-LX1.
5
6
PRA-BD11
6
7
7
8
A
B
C
D
E
F
97
8