Installation
3.
Feed the pin plugs (K21 and K22) underneath the bar and between the two thick
cables (Fig. 5).
Fig. 5 Feeding cables
4.
Insert the cable end with pin plug K22 into the joint between the upper and lower
arm as shown in Fig. 6. Make sure the cable runs between the two thick cables.
Siemens AG
Medical Solutions
Fig. 6 Cables in joint
SPR8-220.031.04
Rev. 04
Page 5 of 30
09.03
CS PS 24
2 - 5
MOBILETT Plus/ -E/ -HP