Siemens MOBILETT Plus Installation Instructions Manual page 14

Hide thumbs Also See for MOBILETT Plus:
Table of Contents

Advertisement

2 - 6
5.
Fasten the cable with a cable tie (2.5x100mm) according to pos. 2 / Fig. 7. The pin
plug K22 must have the same position as shown in Fig. 7, in line with the arm
pieces (pos. 3 / Fig. 7).
6.
Place two cable ties (2.5x100mm) according to pos. 5 / Fig. 8.
7.
Move the arm to see that the cable runs freely throughout the arm and is not
stretched or trapped.
MOBILETT Plus/ -E/ -HP
2
1
Fig. 7 Cable fastening on upper arm.
SPR8-220.031.04
Rev. 04
3
Page 6 of 30
09.03
CS PS 24
Installation
Siemens AG
Medical Solutions

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mobilett plus eMobilett plus hp

Table of Contents