Final Assembly - Siemens MOBILETT Plus Installation Instructions Manual

Installation

Final assembly

1. For MOBILETT Plus HP, reconnect the batteries and remount the protective
cover.
2. Switch S10 back to operating position.
3. Mount the side covers (pos. 2 / Fig. 1) and the cover with the cassette
compartment (pos. 3 / Fig. 1).
4. Mount the MOBILETT upper system cover (pos. 1 / Fig. 1). For MOBILETT Plus
HP, first connect K106.
3
1
Fig. 41 Mounting of the DAP meter
5. Position the DAP meter according to pos. 1 / Fig. 41.
6. Lock the DAP meter with the lock strips and four screws (PT 4x8mm) (see pos. 2 /
Fig. 41).
7. Connect the modular pin plug at pos. 3 / Fig. 41.
8. Fasten the clamp (pos. 4 / Fig. 41) with two screws (PT 4x8mm).
Siemens AG
Medical Solutions
SPR8-220.031.04 Page 29 of 30
Rev. 04 09.03 CS PS 24
2 - 29
4
2
MOBILETT Plus/ -E/ -HP
2