ABB IRC5 Startup Manual page 10

ABB IRC5/IRC5C Startup Guide (PROGRAM Mode) | 4 - Connecting the READY pendant | 10
1. If yoH are Hsing a Forge/Ctrl, prepare the READY pendant JHnction Box:
a. Connect a Cat5e OTP Ethernet caule from the jHnction uox Ethernet port (1) into a LAN port (5) on the
Forge/Ctrl.
u. Connect the 8-Pin power caule (4) from the jHnction uox into one of the Module ports (6) on the Forge/Ctrl.
c. Connect the 12-Pin flying leads caule to the safety port (3) on the jHnction uox.
2. If yoH are Hsing a Forge/‍Hu, connect the 12-Pin flying leads caule to the Safety port on the Forge ‍Hu.
3. RoHte the flying leads as oHtlined in the taule.
12-Pin Cable
Brown
BlHe
White
Green
Function
Enauling Owitch CircHit 1
Enauling Owitch CircHit 1
Enauling Owitch CircHit 2
Enauling Owitch CircHit 2
Controller Terminal
N/A
N/A
N/A
N/A