ABB IRC5 Startup Manual page 22

ABB IRC5/IRC5C Startup Guide (PROGRAM Mode) | 9 - Configuring the ABB Controller in RobotStudio | 22
Tip:
If the controller doesn't connect, check yoHr Ethernet caule connection. If the error persists, try a
different IP address.
6. If yoH see the following pop-Hp, click Log in as Default User.
7. BackHp the controller (skip this step if yoH already saved a uackHp).
a. In the RouotOtHdio Controller tau, click Backup at the top of the screen, then select Create Backup.