Figure 31. Disconnecting the right control panel cable
4. Remove the screws that secure the right control panel cable cover to the chassis and remove it from the enclosure.
5. Remove the screws that secure the right control panel ear to the chassis.
6. Move the control panel partially away from the enclosure.
7. Pull the blue pull tag to disconnect the control panel cable from the right control panel.
Figure 32. Removing the right control panel ear
8. Hold the right control panel ear and the cable, remove them from the enclosure.
Installing the right control panel ear
Prerequisites
NOTE:
Before working on the right control panel ear, ensure to remove the sled or sled blank from bay 8.
34
Field service information