Dell EMC PowerEdge MX7000 Field Service Manual page 62

Figure 71. Securing the enclosure in the rail
4. Install the sleds, rear modules, power supplies, and fans.
Removing the enclosure from the rack
WARNING: To avoid injury, do not attempt to lift the enclosure by yourself. Dell recommends that a minimum of
two people lift the enclosure.
1. Remove the sleds, rear modules, power supplies, and fans.
2. Loosen the captive screws on the front panel of the enclosure to release the enclosure from the rack.
3. Press the blue release button and pull the enclosure handles.
4. Pull the enclosure until the rear enclosure handles are visible.
5. Press the blue release button, and pull the rear enclosure handles.
6. Hold the rear enclosure handles, and pull the enclosure out from the rail.
62 Field service information