Dell EMC PowerEdge MX7000 Field Service Manual page 35

Steps
1. Connect the right control panel cable to the control panel board.
2. Align the right control panel ear with the enclosure.
3. Fasten the screws to secure the right control panel ear to the chassis.
4. Fasten the screws to secure the right control panel cable cover to the chassis.
Figure 33. Installing the right control panel ear
5. Connect the power button cable to the control panel board.
6. Install the control panel cable access hatch.
7. Fasten the screw to secure the control panel cable access hatch to the chassis.
Figure 34. Connecting the right control panel cable
Next steps
1. Install the sled or sled blank in bay 8.
Field service information 35