HP Metal Jet S100 User Manual page 13

For more information see
12.
WARNING! Entrapment Hazard. The Load station door must not be closed when a person is inside,
even if the machine is not energized. If a person is trapped inside, perform the following escape
procedure.
Door lock escape release
The procedure if a perosn is trapped in the Build Unit. Always perform the steps of the procedure in the
order presented.
1. Keep calm and locate the the door escape release knob which is located in front of the luminescent
escape arrow.
2. Rotate the knob 180º to the unlocked position.
3. The door lock is released and you can open the door.
4. Once the door is open, turn the knob to the original, locked position.
Build-unit transport on page 11 and Personal protective equipment on page
Mechanical hazard 9