Table of Contents
Advertisement
1.
Explosion-protected vacuum cleaner
2.
Feeding platforms and printing area
3.
Lateral overflows
4.
Front and rear overflows
5.
Platform perimeter
CAUTION:
the service kit and replace the damaged part.
External vacuum system for powder transport
Accessory to be provided by customer to be connected to the powder management station to transport
powder to the internal tank.
To connect the external vacuum system to the powder management station, there is a DN50 (2 inch)
tri-clamp interface.
Specific requirements for this device are defined in the site preparation guide.
WARNING!
30
Chapter 1 Introduction
If any attachments are damaged, the bonding and earthing cannot be guaranteed. Check
See
Explosion hazard on page 4
for safety precautions.
Advertisement
Table of Contents
Troubleshooting
