HP Metal Jet S100 User Manual page 45

10. Use the hose to vacuum the required powder from the container.
NOTICE:
reached, the buzzer stops sounding.
11. The Front Panel tells you when the vacuuming has finished. Tap Next.
12. Put the vacuum hose back into its holder with the nozzle facing upwards.
CAUTION:
upwards to avoid generating dust clouds.
NOTICE:
WARNING!
in the air can form an explosive atmosphere.
13. Clean any powder spillage in the area, then follow the maintenance cleaning procedure:
working area on page
Load a build unit
Always use a clean and empty build unit with its filter placed correctly on the main platform.
CAUTION:
problems such as overfilling, equipment damage, powder spillage, or explosion risk.
CAUTION:
A buzzer sounds to advise you when the target is almost reached. When the target is
When moving the vacuum hose, always do it carefully and with the nozzle facing
This hose is not for use in cleaning operations.
Explosion hazard. During this operation, there is a risk of explosion. Combustible dust
65.
Ensure that the build unit is completely empty before inserting it. Otherwise, you may face
If you forget the build-unit filter, the build will be lost.
Clean the
Load a build unit 41