HP Metal Jet S100 User Manual page 50

5. Check the area and clean up any spilled powder, then follow the regular cleaning procedure: see
Clean the working area on page
6. Close the door of the powder management station. It then prepares itself for the next job.
NOTICE:
extracting the loaded build unit. You must close the door and follow the normal insertion process:
See Insert a build unit on page
Extract powder to a build unit
Always follow the steps of the procedure in the order presented.
Safety warnings
For more safety information, see
1. Ensure that an empty build unit has been inserted into the powder management station.
CAUTION:
face problems such as overfilling, equipment damage, powder spillage, or explosion risk.
2. From the left menu of the front panel, select the production icon
3. At the front panel, confirm that the powder is compatible and the build unit is empty.
4. Tap Start.
5. The progress of the extraction process is displayed on the front panel.
6. When the extraction has finished, that is also displayed on the front panel. Tap Done.
46 Chapter 3 System operation
65.
If you have brought a new build unit for loading, you can introduce it immediately after
42.
Safety precautions on page 2
Ensure that the build unit is completely empty before inserting it. Otherwise, you may
, then tap Extract powder.