HP Metal Jet S100 User Manual page 99

6. Reinsert the filter between the container and the central tube, with the closed end at the top and
the open end at the bottom.
7. Align the filter in its housing and relatch the filter body.
8. Clean the bottom area cover with an explosion-protected vacuum cleaner.
WARNING!
generated.
NOTICE: Do not disconnect the earthing connection during this task.
Finish replacement
Always follow the steps of the procedure in the order presented.
■
Ensure that all windows, covers, and doors are closed and in their original positions.
NOTE: Inspect for dust, if there is any present; remove it with an explosion-protected vacuum cleaner.
Replace the vacuum system pre-filter (5S375A)
To replace the vacuum system pre-filter you need the 5S375A - HP Metal Jet Powder Vac. Pre Filter,
provided in the yearly maintenance kit.
To replace the filter, follow the procedure described in
but replace the filter with a new one instead of cleaning the old one.
Replace the vacuum system HEPA filter (5S376A)
Safety warnings
For more safety information, see
Explosion hazard. Hot surface, mechanical and electrical sparks, static electricity may be
Safety precautions on page 2
Clean the vacuum system pre-filter on page 92,
Finish replacement 95