Issue 1.0
Keytelephone Access to System Settings
Various system details can be displayed at any display terminal.
System Properties
At the idle terminal:
Press Feature and then keypad digit 3
VERSION:
MAC:
HKEY:
Version = Main Software version level installed onto the GCD-CP10
MAC = MAC address of the GCD-CP10
HKEY = Hardware Key of the GCD-CP10
VIOPDB
At the idle terminal:
Press Feature and then keypad digit 4
VoIP-E1 Slot 1
MAC:
DSP:
000/000/256:0/0/0:0/0/0
VoIP = IPL Type Slot1 = GCD-CP10 256 = resources available
MAC = MAC address of the IPLE card
DSP =
If the IPLE card is not installed the display will show:
VoIPDB:
Not Installed
MAC:
DSP:
000/000/000:0/0/0:0/0/0
IP Address
At the idle terminal:
Press Feature and then keypad digit 6
IP Address Information
System:
VoIPDB:
System = IP Address of the GCD-CP10
VoIPDB = IP Address of the IPLE card
This information is also available within the M=Navigation Key menu
System – Menu 820
VOIPDB – Menu 830
IP Address – Menu 840
90
2.00.50
xx-xx-xx-xx-xx-xx
nnnn-nnnn-nnnn
256
xx-xx-xx-xx-xx-xx
xx-xx-xx-xx-xx-xx
192.168. 0. 10
172. 16. 0. 10
UNIVERGE SV9100
System Maintenance Manual