Summary Of Sv9100 Alarms - NEC UNIVERGE SV9100 System Maintenance Manual

UNIVERGE SV9100

Summary of SV9100 Alarms

Alarm
Type Name
No.
1 Minor PKG Initialize
Error.
2 Minor PKG
Mounting Error
3 Minor Communication
fault between
CD-CP00 and
other PKGs.
System Maintenance Manual
Content of Alarm
1. The PKG failed to 1. PKG not inserted firmly.
initialize.
2. PKG was removed, but
2. The PKG did not start not reinserted firmly.
normally.
3. Old PKG data still
reported due to no
initialization.
The unit did not step on 1. The package is half.
a regular procedure and
it was pulled out. Or, it is
2. The package is out of
not normally inserted.
order.
The error occurred when 1.The unit is half. Minor.The
communicating with the power-supply voltage of the
package. When the system is outside ratings.
package is broken, it 3.The equipment that
recognizes it as a generates the noise in the
communication fault. same power supply system
as the power supply origin
of the system is connected,
and it malfunctions because
of the power supply noise.
4.The equipment to which it
is adjacent to of a main
device, and has put out the
radiation noise exists, and it
malfunctions because of the
radiation noise. 5.The
chassis is not properly
grounded.
Cause Action
1. Insert PKG firmly.
2. Insert PKG firmly.
3. Delete slot
information in
PRG 90-05 and
reinsert the PKG.
1. Please insert the
package firmly.
2. Please try again
after initializing the
system data once
when LED doesn't
blink normally. 3.
Exchange of packages.
1.Please insert the unit
firmly.
Minor.The power-
supply voltage must
use another power
supply when is in the
range of ratings or
measuring with the
voltmeter, and
deviating from the
rated range.
3.Please use the
power supply besides
the equipment with
the possibility of the
noise source.
4.Please separate as
much as possible and
use a main device
from the equipment
by which you seem
may generate the
radiation noise.
5.Please ground the
chassis correctly.
Issue 1.0
Recovery
Upon initialization,
the PKG is
recognized.
When the unit is
reconfirmed, the
error is recovered.
When the unit is
reconfirmed, the
error is recovered.
69