NEC UNIVERGE SV9100 System Maintenance Manual page 88

Issue 1.0
Alarm
Type
No.
61 Not set SIP extension
trouble
information.
62 Not set DtermIP trouble
information.
63 Not set SIP-MLT trouble
information.
64 Major VoIPDB LAN Link
Error.
76
Name Content of Alarm
It failed in the
registration of the SIP
extension terminal.
The SIP extension
terminal was not able to
acquire DSP.
• At Regist to SV9100 of
the SIP extension
terminal.
• When you cannot
acquire the DSP
resource when it sends
it.
The error occurred by
the DtermIP relation.
• When the error occurs
while communicating
with VoIPU or DtermIP.
• When it becomes
impossible to do the
communication
between SV9100 and
DtermIP
• When failing in the
acquisition of DSP.
The trouble occurred by
the SIP-MLT relation.
• The DSP resource was
not able to be acquired
at incoming/outgoing.
• The negotiation with
VoIPDB failed.
The link of LAN of
VoIPDB came off.
Cause
• The registered port is used
by other extension.
• The license is insufficient.
• DSP of VoIPDB was not
able to be acquired.
• The packet loss occurred
on the network or the wiring
cutting occurred.
• DSP of VoIP was not able
to be acquired.
• The packet loss occurred
on the network or the wiring
cutting occurred.
• DSP of VoIP was not able
to be acquired.
• LAN cable is defective.
• Connected HUB broke.
• Defect in CD-CP00.
UNIVERGE SV9100
Action Recovery
Reconfirm wiring and
the system data
setting.
Confirm whether each
equipment such as
access points works
normally.
Confirm whether each
equipment such as
wirings and HUB is
normal.
Confirm whether each
equipment such as
wirings and HUB is
normal.
Confirm LAN When the
connector and wiring. connection returns
normally, the error
is recovered.
Please inquire an
uncertain point of the
maker.
System Maintenance Manual