Common Dim Commands - NEC UNIVERGE SV9100 System Maintenance Manual

UNIVERGE SV9100
C
S 6
OMMON
ECTION
Enter
Mail in 0 0 0 0 Output of all system activity is
Mail in 0 0 0 0 Output of all system activity is
Enter
Mail in 0 0 1 2 Output of all ISDN activity on
Mail in 0 0 1 2 Output of all ISDN activity on

When the ISDN output is turned on, the DIM will output the ISDN blade slot and circuit that is
currently set as the master clock for the system.

The slot number is shown by master current bid : xxH (xx is the slot number in hexadecimal).

The circuit of the blade is shown by master current line : xxH (xx is the circuit number in hexadecimal).
System Maintenance Manual
DIM C
OMMANDS
Function
turned on.
No ISDN information output.
turned off.
Function
the system is turned on.
the system is turned off.
DIM Output
Enter CAPS debug mode.
The activity of all extensions and lines is
output.
Exit CAPS debug mode.
DIM Output
Enter ISDN debug mode. master current bid
: xxH master current line : xxH
The activity of all ISDN blades will be output.
Exit ISDN debug mode.
Issue 1.0
31