23.3.2 Door hinge
23.3.2.1 Door hinge secured to cabinet with rivets
Loosen the three screws that hold the hinge to the frame of the
washing machine door (red arrows).
Use a drill with a 4 mm Ø point to drill four rivets (blue arrows) that
hold the hinge to the unit.
Take care not to damage the bellow seal.
23.3.2.2 Door
Angle out the two frames taking care not to break or scratch them.
Before intervening on the handle unit, make a careful note of the
position of its various parts.
In order to remove the door glass, loosen the six screws and remove
the respective plates (blue arrow) that hold it to the frame.
When repositioning the door pay attention to its right position by
referring to the index indicated by the yellow arrow.
23.3.2.3 Door hinge secured to cabinet with screws
Loosen the two screws securing it to the cabinet
104/124
Technical Support - DMM
599 75 58-67 Rev.04