Table of Contents
Advertisement
6.2.2
Control panel configuration
The washing programmes, the functions of the selector knob (where featured) and the various sensors vary
according to the model, since these are determined by the configuration of the appliance.
6.2.2.1
Programme selector (S1)
The selector used is of the HI-FI type (the dial has no index and no
reset position, the programme selected is indicated by the fact that
the corresponding LED lights up). The number of positions cannot be
configured. There are always 14 (in all styling) and they are bound to
the number of LEDs that indicate the washing programmes.
The programmes can be configured to perform different washing
cycles (e.g.: water level, drum movement, no. of rinses and the
washing temperature to be selected according to the type of
garments).
The selector can be turned both clockwise and anti-clockwise.
For each programme, the compatible options and other parameters
are defined.
6.2.2.2
Programme configuration
The table below lists the parameters that can be used to define the washing programmes.
Types of fabric
Special programmes
Temperature
Spin
Options (Normal/Possible)
Programme phases
Technical Support - DMM
S1
P1
Cotton/linen, Synthetic fabrics, Delicates, Wool, Hand-wash,
Shoes, Jeans, Duvet, Silk.
Soak, Mini-programme, Easy-Iron, Conditioner, Rinses,
Delicate rinses, Drain, Delicate spin, Spin.
Normal, Maximum: the initial temperature is the one set for the
washing programme selected.
Normal, Minimum, Maximum.
Rinse hold, Night cycle, Pre-wash, Stains, Extra Rinse,
Easy-Iron, Time Manager 1/2/3/4/5/6/7/8, Reduced spin speed,
No spin.
Pre-wash, Wash, Rinses, Spin, Delayed start.
24/124
S4
S2
S5
S3
S9
S8
S6
S7
S10
599 75 58-67 Rev.04
Advertisement
Table of Contents
